Kenwood TM-D700A Cross Band Repeater Setup

Ensure TNC is OFF
Set Band A (left) to a VHF frequency
Set Band B (right) to a UHF frequency
Set CTCSS, DCS or DTCS on
Set UHF low power
Go to Menu 1-7-6
Rotate tuning knob till CROSS-BAND is displayed and press OK
You are now in CBR

Press Menu, go to menu 1-7-6 select OFF and press OK
CBR is now off, ESC to go back to normal display
This radio has PM available, save CBR settings in a PM for convenience

You MUST ID yourself, no automatic ID

Return to Cross Band Repeater Setup - Small Screen